Filtering equipment, filter cloth use matters needing attention
1, bag filter categories:
Matters needing attention:
① filter cloth should not hang too loose or too tight, too loose loose dust, too tight and easily pull the bad. The company is located in:
② old and new filter bag should not be mixed to avoid damage to the moment is not the same as the normal operation of equipment. The company is located in:
③ replace the filter bag, the first blow with compressed air, and then check for holes, a hole to repair a good left to replace. If the filter bag was dusty, washed with water, leaving a dry replacement. The company is located in:
2, wood headphones category:
Matters needing attention:
① device fungus filter bag, do not be hung with a hard filter bag, to avoid damage to synthetic filament, the filter bag perforation in the short term. The company is located in:
② should stop when the appropriate thickness of the cake, unloading cake after the operation, so can extend the service life of the filter bag. The company is located in:
③ for filter bags can not be directly buckled with the hard filter to pull down the filter bag, application force in the filter bag on the sewing aid pull. The company is located in:
④ unloading cake, cake unloading tools should try to keep parallel with the filter cloth to prevent damage to the filter bag.
3, filter press categories:
Matters needing attention:
① When installing the filter cloth, ensure that the filter cloth is flat and fixed on the part of the frame to prevent the filter cloth from being damaged when the frame is pressed due to the filter cloth discount. The company is located in:
② cake attached to the filter cloth at the moment should not be too long, too long will cause deformation and sagging cloth. The company is located in:
③ unloading cake, should follow the direction of the filter cloth shovel cake. The company is located in:
4, belt filter categories:
Matters needing attention:
① should be the correct measurement of the required filter cloth length (including connector length). The company is located in:
② sewing to ensure that the two parallel or parallel weft to prevent the operation of the filter cloth deviation. The company is located in:
③ interface should pay attention to the direction of operation, to avoid scraper obstructing the filter cloth interface damage to the filter cloth or cloth obstruction. The company is located in:
5, vertical plate machine (vertical disk machine):
Matters needing attention:
① selected filter cloth should not be too thick, too thick is not conducive to the sewing machine when installed. The company is located in:
② The appearance of the selected filter cloth should not be too lubricated, too lubricated filter cake composition, affecting the production of power.
6, labor machine (vertical belt filter): Note:
① request cloth has a certain thickness and strong tensile strength.
② connector to ensure that the two parallel or parallel weft to prevent the operation of the filter cloth deviation. The company is located in:
③ interface should pay attention to the direction of operation, to avoid scraper obstructing the filter cloth interface damage to the filter cloth or cloth obstruction.
浙江天台丰顿滤料有限公司是一家专业从事：液体过滤袋、工业滤布、滤布、滤袋、除尘袋生产销售的滤布厂家，多年来在液体过滤袋、滤袋、工业滤布、除尘袋生产上积累了丰富的经验和领先的技术。
|
