Belt filter filter cloth and tape attack deviation should pay attention to maintenance:
1. Tension filter cloth installed
Tension the installation is to avoid the tape with a fixed filter cloth, but also to prevent the filter cloth at the feed gate sag set, it is connected to the tension roller through a pair of cylinders to complete the above work. First of all, compressed air into the oil, gas do not leave the device, and then through the pneumatic control cabinet, pneumatic control cabinet through the 8 mm duct were connected two tensioning cylinders, the pneumatic control cabinet operation, can control the cylinder piston rod telescopic. The expansion and contraction of the cylinder piston rod also drives the tension roller movement, when the cylinder piston rod elongation, the filter cloth to relax, on the contrary cloth tension. The tensioning cylinder is in a contracted state during normal operation of the belt filter.
2. Filter cloth automatic biasing installation
The filter cloth is automatically adjusted by the filter cloth is driven by the cross-conditioning lever rotation, the cross-conditioning rod rotation caused by pneumatic valve action, pneumatic valve and then through the 8 mm of the trachea, and the two-way cylinder connected. One end of the piston rod of the bi-directional cylinder is fixed on the frame, the piston rod on the other end is connected to one end of the deflection roller, the other end of the deflection roller is fixed on the frame by a hinge, the stretching of the bi-directional cylinder piston drives the deflection roller One end of the action. As one end of the offset roller is fixed and the other end is driven by the air cylinder, the angle α between the roller and the front and rear rollers will be changed. The angle between the roller and the roller causes the axial force component of the roller. When the offset roller adjustment, the angle component with the roller α1 axial component caused by the same cause of the distribution component of the filter cloth size equal, and the opposite direction, the filter cloth to produce deviation of the resultant force is zero, so that Arrived on the filter cloth automatically adjust the purpose.
3 filter cloth deviation manual adjustment installation
The manual filter cloth adjusting device is arranged on a bearing seat capable of sliding on the rail box, one end of the rail box is connected with one end of a conditioning screw rod, and the other end is extended through a support rod fixed on the frame and equipped with a handle , Just turn into the handle can adjust the screw, adjust the screw drive rail box on the slide back and forth before and after the manual deviation of the roller track box for the fore and after movement, so that you can adjust the manual offset roller and roller folder Angle to reach the adjustment of the filter cloth deviation.
4. Adjustable filter cloth deviation
Adjustable filter cloth deviation, mainly on the roller adjustment, that is, roller and roller centerline adjustment. One of the most important offset is automatic adjustment of the roller, manual offset roller and tension roller adjustment.
浙江天台丰顿滤料有限公司是一家专业从事：液体过滤袋、工业滤布、滤布、滤袋、除尘袋生产销售的滤布厂家，多年来在液体过滤袋、滤袋、工业滤布、除尘袋生产上积累了丰富的经验和领先的技术。
|
