Precautions
1, filter cloth around the filter press contact parts should ensure that the formation of flat, can not produce wrinkles, to avoid being squeezed filter cloth caused damage or mud leakage.
2, to avoid the buckle ring is too long may extend into the filter press part of the damage to the filter cloth, or cause mud leakage, should cut short tail. The company is located in:
3, During installation, pay attention to no foreign matter or large sludge particles between the filter cloth and the filter plate. Larger sludge particles or foreign objects may cause damage to the filter plate or filter cloth when the board is plywood.
4, filter cloth installation should pay attention to the positive and negative (on the mud side and non-on the mud side), generally no special requirements, the cloth cloth surface (polished surface) on the mud. Otherwise the installation error will be as easy to plug the filter cloth, low filtration efficiency. The company is located in:
5, the installation of filter cloth, the buckle can not be used to lock the filter cloth is too tight, or residual filter press contact parts of the filter cloth within the sludge will not be automatically cleaned.
6, spare filter cloth should be stored in a cool dry place, it is recommended to use dark shade cloth to be protected from ultraviolet radiation to prevent the aging of the filter cloth material.
7, before installing the filter cloth, you need to install the support filter cloth, its role is in the mud, the filter cloth filter cake was rapidly downward due to the role of gravity may be friction plate surface bump abrasion to a lower Degree, in order to protect the filter cloth, extend the service life of the filter cloth, and improve the filtering effect, the installation method to support the filter cloth can refer to the installation of the filter cloth box, roughly the same.
浙江天台丰顿滤料有限公司是一家专业从事：液体过滤袋、工业滤布、滤布、滤袋、除尘袋生产销售的滤布厂家，多年来在液体过滤袋、滤袋、工业滤布、除尘袋生产上积累了丰富的经验和领先的技术。
|
