Filter filter cloth filter is the core of the filter, if the filter cloth is not done, then the best filter press are not on the force, the filter press filter did not say. So since the maintenance of filter press and filter press filter cloth maintenance so important, then we usually in the process of how to do it?
Filter press in the use of the process, we should pay attention to what time, the need for parts and transmission parts of the lubrication and maintenance, in particular the automatic control system feedback signal position (electrical contact pressure gauge and trip switch, etc.) and hydraulic system hydraulic The accuracy and reliability of the component action must be guaranteed in order to be able to maintain normal work, for which the following should be done:
1. Whether the connection is firm, and whether the parts are good, these are what we usually have to do!
2. To pull the car, sprocket chain, bearings, piston rods and other parts to be regularly checked to maintain good lubrication and flexible movements, the synchronization of the trolley car and the hanging of the chain to be timely adjustment.
3. On the electronic control system to conduct a regular insulation and reliability test, found by the electrical components caused by the accuracy of the action is poor, not flexible, etc.,
To be repaired or replaced in time.
4. The maintenance of the hydraulic system, mainly on the hydraulic components and the sealing of the interface inspection and maintenance.
5. Always check the sealing surface of the filter plate to ensure that it is smooth and clean; before pressing, to filter cloth to be carefully checked to ensure that it is not folded,
No damage, no slag, so that the formation of intact, to ensure that the filter effect; at the same time to always wash the filter cloth to ensure that filter cloth filter performance.
6. If you do not use for a long time, the filter plate should be clean and neatly discharged in the filter press frame, with 1 to 5MPa pressure compression. After the filter cloth is cleaned
Dried; the exposed parts of the piston rod and the manifold shall be coated with butter.
7. filter press filter cloth in use, it should be promptly cleaned, one side of the stolen goods without water coagulation case! Do not stop for a long time, such as too dry filter cloth shrink, too wet is easy to rot!
If we can do the above, I believe that your filter press will be very good with your work, and your filter press filter can also save a lot for the enterprise to bring direct economic efficiency and efficiency The
浙江天台丰顿滤料有限公司是一家专业从事：液体过滤袋、工业滤布、滤布、滤袋、除尘袋生产销售的滤布厂家，多年来在液体过滤袋、滤袋、工业滤布、除尘袋生产上积累了丰富的经验和领先的技术。
|
