Working principle
Dust collector from the hopper, the box, the box, the lower box and other components, the upper and lower box for the sub-room structure. Work, dust-laden gas from the inlet into the ash bucket, coarse dust directly into the bottom of the hopper, fine dust with the air flow up into the middle and lower box, the dust accumulated in the bag outside the surface, filtered Gas into the upper box to the net gas collection tube - exhaust duct, the exhaust fan to the atmosphere.
Cleaning process is to cut off the room of the net outlet air duct, so that the room in the bag without air flow through the state. And then open the pulse valve with compressed air for pulse jet cleaning, shut off the valve closed enough time to ensure that after the blown from the filter bag on the dust off the dust settling to the hopper, to avoid the dust from the bag after the surface with the air To the phenomenon of the adjacent bag surface, so that the filter bag clean thoroughly, and by the programmable controller on the exhaust valve, pulse valve and ash discharge valve, such as automatic control.
Features
1, the dust collector with sub-room to stop the air pulse cleaning technology, to overcome the conventional pulse dust collector and sub-room backflush dust collector shortcomings, cleaning capacity, dust removal efficiency, low emission concentration, air leakage rate, energy consumption Less, less steel consumption, small footprint, stable and reliable operation, good economic returns.
2, due to the use of sub-room to stop the pulse of air-jet cleaning, blowing once can achieve the purpose of thorough cleaning, so cleaning cycle extended, reducing the cleaning energy consumption, pressure consumption can be greatly reduced.
3, check the bag can be kept in the system fan, the system under normal operating conditions sub-room. Filter bag pocket with elastic ring, sealing performance, solid and reliable. Filter bag keel with polygons, reducing the friction between the bag and keel, extending the life of the bag, and easy to unload bags.
4, the use of the upper bag method, when the bag out of the skeleton, the dirty bag into the lower part of the box ash bucket, removed from the manhole to improve the operating conditions for the bag.
5, the box with air tight design, good sealing, check the door with excellent sealing material, the production process to kerosene leak detection, air leakage rate is very low.
6, into and out of the air duct layout is compact, air resistance is small.
浙江天台丰顿滤料有限公司是一家专业从事：液体过滤袋、工业滤布、滤布、滤袋、除尘袋生产销售的滤布厂家，多年来在液体过滤袋、滤袋、工业滤布、除尘袋生产上积累了丰富的经验和领先的技术。
|
