Plain weave is the simplest, lowest cost and most common tissue in fabrics. It can form a complete plain weave cycle with two warp and weft threads. The plain weave has many interlacing points and the porosity is low, but the relative position is stable because of plain weave. Poor air permeability, rarely using plain weave at high filter speeds.
The twill weave is formed by continuous weaving of more than three warp and weft fabrics. There are diagonal lines on the fabric surface, and the bag dust collector uses more twill. The twill weave is less than the plain weave. The porosity is large and the air permeability is good. The wind speed will be higher than plain.
The satin weave is a structure made up of five or more continuous warp and weft yarns. The basic feature of this organization is that the weaving points are not continuous. There are many warp or weft threads floating on the surface of the cloth, which is conducive to dust stripping, and the weaving of satin weaves. The points are less than plain and twill, and the air permeability is the best, but more yarns float on the surface of the fabric and are more likely to be damaged.
(Addtime：2018-4-20)
