1. Belt filter cloth cut failed to reach the level, resulting in cloth length on both sides of the left and right sides, resulting in running deviation in the filter cloth.
2. Belt filter cloth positioning wheel installation failed to reach the level, so that the uneven force on both sides of the filter cloth lead to deviation.
3. Poor regenerative filter cloth or filter cloth washing pressure is insufficient, resulting in varying degrees on both sides of the filter cloth, resulting in tension on both sides of the range.
4. Correction cylinder intimal damage, leading to deviation correction cylinder pressure out of gas, correction roller power imbalance, resulting in deviation of the cloth edge, discount, shorten the life of the filter cloth.
Correction roller due to the smaller wear circumference or smooth surface so as to reduce the friction force, correcting the failure is also caused by the common phenomenon of filter cloth deviation.
6. Solutions: mainly to another automatic correction of a manual correction device. Manual correction of the basic principles: By adjusting the front filter cloth filter guide wheel on the filter cloth on both sides of the degree of tension, the filter cloth on both sides of the same force, thus completing the rectification work.
The company is located in:
7. Manual correction to adjust the leading direction of the filter cloth offset, automatic correction fine-tune the small offset filter cloth, two kinds of corrective measures with each other to ensure that the cloth is not running deviation during operation, accidental deviation can be corrected in time .
(Addtime：2018-1-4)
